2014年1月10日星期五

Art Glass--sandblasted glass




Introduction: sandblasting is the act of shooting an abrasive material,such as sand,at a piece of glass. The abrasive scratches the glass surface,creating the frosted look.There are two type of sandblasting techniques: surface sandblasting and deep sandblasting. Surface sandblasting scratches the surface of the glass,producing a 2D effect,deep sandblasting show a 3D effect.
Application:partition,shower door and so on.
Production: clean and dry the glass,mask film,”MOKE” vertical glass cutting plotter cut prepared pattern on film,tear off the part need to sandblast,sandblast to the exposed part,tear off the whole film,clean the glass, avoid residual sand.

Deep sandblasted glass, sandblast to one part for specified time to form depth on glass, sandblast part by part to form different depth and level,show 3D effect.The procedure is complex,we should sandblast part by part,and add color to glass,so it need mask film and cut pattern more than one time,”MOKE”vertical glass cutting plotter ensure the repeat precision,solve the problem that second pattern do not coincident with the first one,and “MOKE”vertical glass cutting plotter adopt laser application,use high temperature to burn the film,it can cut on uneven glass surface,avoid blade stucked by lumpy sandblasted glass,so when we make deep sandblasted glass,use laser instead of knife.

没有评论:

发表评论