Introduction: Glue chipped glass is glass that has been etched
and covered in warm, wet hide glue. As the glue cools, it attaches to the rough
glass. As it dries, it shrinks and rips thin shards off the surface in a
fern-like random pattern.
Application:
can be used in contraction glass and art glass,for example:shower door,indoor
partition,astigmatism plate,etc.
Production:
1.clean the glass to remove possible grease or oil
2.lightly sandblast or etch the area of
flate glass to be chipped
3.puring the warm animal glue solution
upon the glass surface uniformly,allow the gule to soak for hours before waring
it to ensure an even final coating on the glass
4.warm the glue to 140℉(60℃)for
hours,make the gule dry up,and cracked,chipped,until it brust fully
5.remove the brusted and residual gule
slice.
Use this technique and “MOKE”vertical
glass cutting plotter in comnination to chip glass in selected area.firstly,mask
film on clearned glass,use”MOKE”vertical glass cutting plotter to cut prepared
pattern on film,tear off the part need to chip,then process accroding to the
above steps.
没有评论:
发表评论