MOKE vertical cutting plotter detail introduction

MOKE vertical glass cutting plotter

         Shijiazhuang Yuanjing ElectronicCo.,Ltd is an enterprise which integrates the research,productionand selling of artglass equipment. As the pioneer who research and manufacture vertical glass cutting plotter, the company gained numbers of independent patents. Top rankingmachinery and superior service are accredited by domestic and overseas customer.

Vertical cutting plotter parameter:

Model	C1000D	C2000D	C3000D	C2000D/L	C3000D/L
Max. Cutting Size (mm)	1220*2440	1830*2440	1830*3300	1830*2440	1830*3300
Dimensions (mm)	3250*1800*1150	3250*2250*1150	3900*2250*1150	3250*2600*1150	3900*2600*1150
Weight (kg)	260	290	340	300	350
Cutting Tool	Blade			Laser + blade
Drawing Command	HP-GL,G-CODE
Max. Cutting Speed	16m/min
Mechanical Precision	0.025mm
Repeat Accuracy	0.1mm
Power supply	AC90—240V/50Hz—60Hz
Support Mode	Vertical
Opertating Environment	Temperature:-10°C—+45°C,Relative Humidity:30%—70%

Application:

Used to cut pattern on glass protective film.

Suitable processing:

Sandblasting,painting,acid etching and so on.

Finished glass:

can be used as glass sliding door,glass partition,glass background wall and so on.

Simple processing step for art glass:

1. mask protective film on glass

2. put the glass on vertical cutting plotter

3. vertical cutting plotter cut graphic on protective film

5.tear off the part need to process

6.sandblast,paint or acid etch

7.tear off the whole film

 (please note the machine cut film only)

After-sale Service:

---One year warranty

---English software

---English instruction

---large number of vector graphic

---remote assistance

Contact:

contact person: Eva Nie

Email: yuanjingmoke@gmail.com

             1932902309@189.cn

skype: bonnie01151001 

              mekecnc  

Wechat / what's app / viber: +86-15732233361

Tel:+86-0311-87892170

Mobil: +86-18032805482  +86-15732233361

Art Glass---Glue Chipped Glass

Introduction: Glue chipped glass is glass that has been etched and covered in warm, wet hide glue. As the glue cools, it attaches to the rough glass. As it dries, it shrinks and rips thin shards off the surface in a fern-like random pattern.

Application: can be used in contraction glass and art glass,for example:shower door,indoor partition,astigmatism plate,etc.

Production: 1.clean the glass to remove possible grease or oil

2.lightly sandblast or etch the area of flate glass to be chipped

3.puring the warm animal glue solution upon the glass surface uniformly,allow the gule to soak for hours before waring it to ensure an even final coating on the glass

4.warm the glue to 140℉（60℃）for hours,make the gule dry up,and cracked,chipped,until it brust fully

5.remove the brusted and residual gule slice.

Use this technique and “MOKE”vertical glass cutting plotter in comnination to chip glass in selected area.firstly,mask film on clearned glass,use”MOKE”vertical glass cutting plotter to cut prepared pattern on film,tear off the part need to chip,then process accroding to the above steps.

Art Glass--sandblasted glass

Introduction: sandblasting is the act of shooting an abrasive material,such as sand,at a piece of glass. The abrasive scratches the glass surface,creating the frosted look.There are two type of sandblasting techniques: surface sandblasting and deep sandblasting. Surface sandblasting scratches the surface of the glass,producing a 2D effect,deep sandblasting show a 3D effect.

Application:partition,shower door and so on.

Production: clean and dry the glass,mask film,”MOKE” vertical glass cutting plotter cut prepared pattern on film,tear off the part need to sandblast,sandblast to the exposed part,tear off the whole film,clean the glass, avoid residual sand.

Deep sandblasted glass, sandblast to one part for specified time to form depth on glass, sandblast part by part to form different depth and level,show 3D effect.The procedure is complex,we should sandblast part by part,and add color to glass,so it need mask film and cut pattern more than one time,”MOKE”vertical glass cutting plotter ensure the repeat precision,solve the problem that second pattern do not coincident with the first one,and “MOKE”vertical glass cutting plotter adopt laser application,use high temperature to burn the film,it can cut on uneven glass surface,avoid blade stucked by lumpy sandblasted glass,so when we make deep sandblasted glass,use laser instead of knife.